PPE
Personal Protective Equipment
Branded work wear helps identify our people and project a consistent and professional image of the Built Environs brand where we work.
Personal Protective Equipment should be sourced from a reputable supplier and must meet all relevant safety codes.
Vests/Shirts
The Built Environs Logo must be placed on the left breast of all upper garments and not placed anywhere else on the front.
With the Home Without Harm Logo to the opposite breast, aligned with the Built Environs Logo.
Left: Use the positive logo on yellow hi-ves garments with black text
Right: Use either the positive or reverse logo on orange hi-vis garments.
Built Environs (BE) Logo
BE logo must be at least 75mm wide (max 110mm wide), with adequate clearance on all sides and particularly between the logo and project title (see pink M’s above). Project title and location set in Arial Bold type and in black. Point size should run no more than width of the BE logo, between 12-18pt size is recommended.
- The BE Logo should also be applied to the back of high visibility shirts or vests, recommended size is 250mm wide.
Hard Hats
Hard hats must display the McConnell Dowell Logo – front and centre.
The Home Without Harm Logo may be centrally positioned on the back.
Scale to fit the space comfortably. With the minimum width of both logos at 45mm.
Home Without Harm Logo
- Use the 3-line “stacked’ version of the Home without Harm logo
- On vests the Home Without Harm logo should be scaled to match the width of the ‘Creative Construction’ wording in the BE logo on the opposite side. With the top edge aligning with the top edge of the BE logo itself.
- The Home Without Harm logo colour is PMS423C or CMYK breakdown 22/14/18/45
Suppliers
Send your supplier a link to this page so they know the rules and ask them for samples. First time suppliers are to provide a sample of the logo prior to ordering. This will allow you to check the quality of their work and ensure that their reproduction is correct.
